Author Topic: 1960's at Hammond  (Read 13045 times)

0 Members and 1 Guest are viewing this topic.

Tom Kepshire

  • Inactive
  • Monon Dispatcher
  • *
  • Posts: 922
  • Go Blackhawks.
    • Bygone Places Along The Monon
1960's at Hammond
« on: February 19, 2012, 09:32:51 pm »
RS power on the point making a stop at the Hammond/Erie depot. The RS unit was added at South Hammond to save turning costs in Chicago.
Life Member #22
Visit www.monon.org

Heath Matthias

  • Inactive
  • Monon Brakeman
  • *
  • Posts: 62
Re: 1960's at Hammond
« Reply #1 on: February 20, 2012, 09:11:40 am »
Was a F3 then added at South Hammond?  Just curious.

Tom Kepshire

  • Inactive
  • Monon Dispatcher
  • *
  • Posts: 922
  • Go Blackhawks.
    • Bygone Places Along The Monon
Re: 1960's at Hammond
« Reply #2 on: February 20, 2012, 10:59:31 am »
The way I understand things yes. To save turning costs, the RS was coupled on to Train 6 for the run to Chicago. It would also head train #5 on its trip south and swap our motive power for an F3 at South Hammond. Perhaps other can add, but that is my understanding.
« Last Edit: February 21, 2012, 04:30:46 pm by Tom Kepshire »
Life Member #22
Visit www.monon.org

Tim T Swan

  • Monon Engineer
  • ****
  • Posts: 302
  • Modeling Bedford in 1948
Re: 1960's at Hammond
« Reply #3 on: February 21, 2012, 03:58:41 pm »
Yes, that's correct.  Here's a photo I took at South Hammond from in 1964 showing that engine change in action.

Ron Marquardt

  • Guest
Re: 1960's at Hammond
« Reply #4 on: February 21, 2012, 07:12:43 pm »
The engine swap at South Hammond was something I'd never heard about before.  After the RS2's were rebuilt into the 50 class, I do remember them running on the north end all the way from Shops to Chicago and back.  I have a problem believing they would routinely tie up two units just to save turning costs.  It doesn't make any sense.  Was this done before or after they went on the late schedule?  / Ron

Tim T Swan

  • Monon Engineer
  • ****
  • Posts: 302
  • Modeling Bedford in 1948
Re: 1960's at Hammond
« Reply #5 on: February 21, 2012, 09:48:26 pm »
Don't know what you mean by "the late schedule" Ron, but I took this shot in February 1964.  And from what I've understood, the turning costs charged by the C&WI were substantial.  They had to hostle the locomotive all the back way down to 51st Street, turn it there, then return it to Dearborn.

Pete Pedigo

  • Administrator
  • Monon Engineer
  • *****
  • Posts: 259
  • MRHTS PRESIDENT #5
    • NEWX
Re: 1960's at Hammond
« Reply #6 on: February 21, 2012, 10:13:24 pm »
Well I have to ask.  How much was a normal "turning cost" ?   I mean, how much could it cost to go to all of this trouble, or was it the time delay if everything did not happen asap ?    Guys talk about these costs like they were rediculously high. 
Pete Pedigo

Tim T Swan

  • Monon Engineer
  • ****
  • Posts: 302
  • Modeling Bedford in 1948
Re: 1960's at Hammond
« Reply #7 on: February 21, 2012, 10:42:20 pm »
Have no idea.  But if the Monon tied up two locomotives this way, they must have been "substantial".

Ron Marquardt

  • Guest
Re: 1960's at Hammond
« Reply #8 on: February 21, 2012, 11:25:49 pm »
Tim, the late schedule was when #5 started leaving Chicago at 5:30 in the evening.  / Ron

Tim T Swan

  • Monon Engineer
  • ****
  • Posts: 302
  • Modeling Bedford in 1948
Re: 1960's at Hammond
« Reply #9 on: February 22, 2012, 01:25:10 am »
In 1964 I was able to take #5 from Dearborn to Lafayette, then #6 back to Dearborn, all on the same day, even time in between even to take a taxi over to Shops for a quick look-around.  As I recall, the two Thoroughbreds then were scheduled to meet somewhere around Romney or thereabouts.  So this must have been before that.

Ron Marquardt

  • Guest
Re: 1960's at Hammond
« Reply #10 on: February 22, 2012, 02:07:49 am »
That's right.  That would be the old early schedule that had a 15 hour layover for the crew in Louisville.  If I remember correctly, the meet was at Manchester.  / Ron

James W Smith

  • Monon Fireman
  • *
  • Posts: 43
Re: 1960's at Hammond
« Reply #11 on: February 25, 2012, 01:05:22 pm »
I remember that schedule Ron -- my then youthful self could stand on the platform at Crawfordsville, watch #6 pull out and whistle, and almost immediately would hear #5 reply.  Must have been some engineer to engineer "how-dy".  Within minutes #5 would be standing at station in C'ville.  Some of the timetables from that time period put the meet in Linden; have seen that one happen, too.

Joe Crnkovich

  • Monon Fireman
  • *
  • Posts: 2
Re: 1960's at Hammond
« Reply #12 on: March 22, 2012, 11:29:31 am »
Didn't the Monon change the schedule in October '64, so that they only needed one set of equipment?

Ron Marquardt

  • Guest
Re: 1960's at Hammond
« Reply #13 on: March 22, 2012, 04:37:47 pm »
That was probably part of it Joe.  On the late schedule, because the crews weren't off duty four hours or more, they didn't have to furnish lodging either.  At Louisville we'd curl up in a coach and get a little nap. 

I think the third part of the equation was to lower the ridership to emphasize the expenses of running the train, and be able to get it pulled off sooner.  / Ron